Home-easy HE440 User Manual download pdf (Page 2)

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

DK

FIN

IRL

EST

SLO

0560

Tel: 0845 2301231

Fax: 01527 557701

Web: www.chbyron.com

E-mail:

suppor[email protected]

Contact:   Helpline: 0845 2301 231

HE200 Programable Remote Control:

Display Functions:

Functions:

1: 12 Programmable Memory Spaces

2: 24Hr Time

3: Timer Setting "On"

4: Timer Setting "Off"

5: Security Mode

6: Timer Mode - Single Timer Setting

7: Timer Mode - Daily Timer Setting

8: Low Battery Warning

9: Unit Code Display

10: Transmission Indicator Signal

Receiver Select

Switch "On" Selected Receiver

Switch "Off" Selected Receiver

Clock Setting

Program Timer/View

Enter

Delete/Pause

Select Up/Down

The HE-200 Remote Control Timer can be paired to 16 separate

receiver units, select the unit code by pressing the unit button.



Unit Setting:

The HE-200 comes with a preset to Group code A. When

using additional remote control timers you will need to

select a new group code.

To select a new group code, remove the battery cover and

using a small screw driver, rotate the group dial to a new

setting e.g. Group B

Remove the battery cover form the back of the remote control.

The HE-200 includes 2 batteries:

 LCD Display: 1 x CR2032 -Byron SX100 (Included)

 RF Transmission: 1 x 23A - Byron SD100 (Included)

Remove the required battery and replace

with new, making sure the polarity matches

the internal markings.

Changing Batteries:

Switching On/Off :

1. Select the unit by

pressing the "unit"

button until the

correct number is

displayed on the

screen.

2. Press the "On"

button, the receiver

socket will switch on.

Never exceed

3000W Combined

maximum load.

3. Press the "Off" button to switch the receiver unit off.

Setting Clock

The remote control displays the time in a 24hr format, to set the time.

1. Press and hold the

clock button for +3sec.

The hrs will now start

to flash

2. Use the

buttons to select

the hours and

press Enter.

3. The minutes will now start to flash, set using the up and down arrows to

select the minutes and then press enter.

Up to Six remote control units can be paired with each HE440 Accessory

Output Channel. To program a channel press the "Learn" button e.g.

accessory output channel 1.

Deleting Remote Control:

To delete a remote control that has been paired with a Accessory Output

Channel, simply press the "Learn" button . The LED will start to blink; press the

"Off" button on the remote control, the LED will blink twice to confirm that the

remote control has been removed from the receiver sockets memory.

Channel reset:

To delete all the remote control units from the memory of the Accessory

Output Channel, hold the "Learn" button for more than 6 seconds, the LED will

start to blink continuously. Press the learn button again, the LED will blink

twice to confirm the deletion of all remote controls form the receiver memory.

Pairing/Deleting with Remote Control:

Accessory Ouput

Channel 1

Learn

Button

LED

The LED will start to flash,

now press the "ON" button

on the remote control, the

LED will stop flashing and the

acessory output will switch

"ON/OFF".

The units are now paired

together, you can test this by

pressing the selected

"ON/OFF" button

Setting Timer :

The HE-200 remote control timer can store up to 12 different timer

programs, ideal for switching on lights throughout the home for added

security.

To program the remote control:

1. Press and hold the "Timer" button for 3 seconds, the

display will show the 12 available memory spaces. Use

the arrows keys to select a memory space, the display

will also show any programmed times already saved.

Press "Enter" to select the program space.

2. Press and hold the "Timer" button for 3 seconds, the

display will show the 12 available memory spaces. Use

the arrow keys to select a memory space, the display will

also show any programmed times already saved.

Press "Enter" to select the program space.

3. The start or On time will start to flash, use the arrow keys to select the hours

and press enter to select the min.

Now select the finish or off time.

4. Finally select the program mode using the arrows keys and press enter to

confirm.

Daily Timer Setting: Activates the program daily

Security Setting: Selecting the security mode will switch the

receiver units "On/Off" randomly through out the set time.

 On = between 40Min - 2Hrs

 Off = between 40Min - 3Hrs

Single Timer: Activates the program for a single time only.

Always refer to the original instruction when using with additional

products

5. Press Timer to exit the setting mode

1 2

Comments to this Manuals

No comments

Home-easy HE440 User Manual Page 2

Comments to this Manuals